Savin 4027 - Manual (Page 23)

Placing Originals
13
1
Placing Originals in the Auto
Document Feeder
Settings should be made in the fol-
lowing situations:
❖ ❖ ❖ ❖ When placing originals consisting of
more than 50 pages:
p.13 “Batch”
❖ ❖ ❖ ❖ When placing originals one by one:
p.14 “SADF”
❖ ❖ ❖ ❖ When placing same width originals of
different sizes:
p.15 “Mixed size”
❖ ❖ ❖ ❖ When placing custom size originals:
p.15 “Placing custom size origi-
nals”
Note
❒ Do not stack originals above the
limit mark on the side guide of the
ADF.
❒ The last page should be on the bot-
tom.
❒ Do not place objects on the sensors
or cover them with your hands.
Doing so could cause the size to be
detected incorrectly.
1. Sensors
AAAA
Set the document guide to the
original size.
BBBB
Place the aligned originals face
up into the ADF.
1. Limit mark
2. Document guide
Note
❒ Straighten any curls in the orig-
inals before placing them in the
ADF.
❒ To prevent multi-sheet feeds,
fan the originals before placing
them in the ADF.
❒ Place the originals squarely.
Batch
When using Batch, the machine cop-
ies originals of more than 50 pages as
a single document, even if placed in
the ADF in parts.
Important
❒ Place special originals, such as
translucent paper, one by one.
AAAA
Press [Special Original].
ZLFH050E
RuC3_ENcopy-F_FM.book Page 13 Monday, June 16, 2003 4:57 PM