Savin 4027 User Manual
Page 121
Supplementary Specifications
111
5
• When using this function, the following limitations apply. When the num-
ber of copies exceeds tray capacity, copying stops. When this happens, re-
move copies from the shift tray, and then resume copying.
*1
To load paper of sizes 7
1
/
4
"
× 10
1
/
2
"
L, 8" × 10"KL, 11" × 15"L, 10" × 14"L,
and 10"
× 15"L, use paper tray 2.
• In the following cases, copies are delivered to the shift tray without sta-
pling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• When the number of copies exceeds tray capacity, copying stops. If this
happens, remove the copies from the shift tray, and then resume copy-
ing.
• You cannot change stapling positions during copying.
• When the original image is rotated, staple orientation changes by 90
°.
• The maximum original image size that can be rotated is as follows:
• When using [Left 2] or [Top 2] with the Combine function, Double Copies,
or Auto Reduce/Enlarge, the "Blank part will appear. Check orientation."
message may appear. If this happens, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce/Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
Paper size
Stapler capacity
500-sheet finisher
A3
L, B4 JISL, 11" × 17"L,
11"
× 15"L, 11" × 14"L, 10"
× 14"L, 10" × 15"L, 8
1
/
2
"
×
14"
L, 8
1
/
2
"
× 13"L
20 sheets (80 g/m
2
)
A4
KL, B5 JISK, 8
1
/
2
"
×
11"
KL, 8" × 10
1
/
2
"
K, 8" ×
10"
K, 7
1
/
4
"
× 10
1
/
2
"
K
30 sheets (80 g/m
2
)
1000-sheet finisher
A3
L, B4 JISL, 11" × 17"L,
11"
× 15"L, 11" × 14"L, 10"
× 14"L, 10" × 15"L, 8
1
/
2
"
×
14"
L, 8
1
/
2
"
× 13"L, 8
1
/
4
"
×
14"
L, 8
1
/
4
"
× 13"L, 8" ×
13"
L
30 sheets (80 g/m
2
)
A4
KL, B5 JISKL, 8
1
/
2
"
×
11"
KL, 8" × 10
1
/
2
"
KL, 8"
× 10"KL, 7
1
/
4
"
×
10
1
/
2
"
KL
50 sheets (80 g/m
2
)
Metric version
A4
Inch version
8
1
/
2
"
× 11"
RuC3_ENcopy-F_FM.book Page 111 Monday, June 16, 2003 4:57 PM