Savin 4027 - Manual (Page 44)

Copying
34
2
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based on the
lengths of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
AAAA
Press [Reduce/Enlarge] .
BBBB
Press [Specifd. Ratio].
CCCC
Make sure [Size Magnificatn] is
highlighted.
DDDD
Enter the length of the original
using the number keys, and then
press [#].
Note
❒ You can enter sizes within the
following ranges:
EEEE
Enter the length of the copy using
the number keys, and then press
[#]
.
Note
❒ To change the length after
pressing [#], select [Original] or
[Co py]
, and then enter the
length.
FFFF
Press [OK] twice.
GGGG
Place original, and then press the
{{{{Start}}}} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
a: Horizontal ratio
b: Vertical ratio
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge]
, and then adjust it further,
using [ n n n n] or [o o o o].
AAAA
Press [Reduce/Enlarge].
Metric
version 1–999 mm
(increments of 1 mm)
Inch
version 0.1"–99.9"
(increments of 0.1")
A" a"
CP2P01EE
RuC3_ENcopy-F_FM.book Page 34 Monday, June 16, 2003 4:57 PM