JVC SA-DV6000 - Manual (Page 39)

62
Other
s
Connecting
Windo
ws Media Pla
y
e
r
Connect the SA-DV6000 to Windows Media Player using the network.
1.
Set STREAM
TYPE in the ENCODE SETUP
menu to “for WMP”.
2.
Open Windows Media Player
.
3.
Select [File]
→
[Open URL].
The following dialog box will appear
.
4.
Set the IP address of the VTR. http://***.***.***.***:####/asf *
→
IP address of VTR
#
→
HTTP
Port number set in “for Media player”
5.
When completed with setting, select OK to establish connection. Memo
●
If there is a lag between the video and audio, set the sampling frequency of input and the audio mode of BR-DV6000 to match, stop playback on Media Player and try again.
●
WMP for Mac OS not supported. Use QuickT
ime Player
. (
☞
page 63)
63
Other
s
Connecting Quic
k
Time Pla
y
e
r
Connect the SA-DV6000 to QuickT
ime Player using the network.
1.
Set STREAM
TYPE in the ENCODE SETUP
menu to “for QT”.
2.
Open Quick
T
ime Player
.
3.
Select [File]
→
[Open URL with New Player].
The following dialog box will appear
.
4.
Set the IP address of the VTR. rtsp://***.***.***.***/live.mp4 *
→
IP address of VTR
5.
When completed with setting, select OK to establish connection. Memo
● When quickly alternating Play and Still operations on QuickT
ime, a 455 error dialog may appear
. In this case, turn of
f the BR-
DV6000 and turn the power back on.
● When repeating Open and Close operations on the QuickT
ime Player
, there may be a lag between the audio and video. In this
case, restart QuickT
ime.
● If there is a lag between the video and audio, set the sampling frequency of input signals and the audio mode of BR-DV6000 to match, close QuickT
ime and launch again.