JVC SA-DV6000 - Manual (Page 10)

4
Caution
●
Make sure the power of BR-DV6000 is of
f when inserting/
removing a CF memory card/LAN card. Inserting/removing a card with the unit power on may damage the data storage section of the CF memory card or the card itself.
●
Do not remove the power cable with the power of the BR- DV6000 on. Recorded section on the CF Memory Card or the CF Memory Card itself may be damaged as a result.
●
Do not use the wireless LAN card continuously for more than 48 hours.
LCD screen
Card status display
: Flashes during
initialization
: LAN card or built-
in LAN enabled
: CF memory card
Inser
ting car
d
1.
T
urn of
f the BR-DV6000 power
.
2.
Insert a card into the SA-DV6000 card slot.
3.
T
urn on the BR-DV6000 power
.
●
Card status according to the inserted card type is displayed on the LCD screen. (
☞
page 6)
● The card status is displayed when setting the LCD screen to the Enlarged display mode.
Memo
When turning the power on, the card status display shown on left will flash during initial- ization.
Basic
Inser
ting/remo
ving CF memor
y car
d/LAN car
d
●
TheSA-DV6000 accepts the following cards for which operation has been confirmed: (As of June 2003) Operating voltage
3.3 V / 5 V
Current consumption
Max. 250 mA
● Wired LAN-card US:
EA2900-1
17 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
Europe:
EA2903-162 (Revision C) (Name of manufacturer: Socket Communications, Inc)
*1
Asia:
EA2906-194 (Revision C) (Name of manufacturer: Socket Communications, Inc)
*1
* Revision indicated on the upper right of package production label. ● Wireless LAN-card TEW
-201PC
TEW
-202CF
TEW
-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:
TRENDware) WCF1
1 (Name of manufacturer: LINKSYS)
*2
AIR-PCM350
(Name of manufacture: Cisco Systems) FCCID: LDK102040
● CF (Compact Flash) card
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)
*1
*1: Use PCMCIA
card
TYPE
1
or
TYPE
2
adapter
*2: Use PCMCIA
card
TYPE
2
adapter
For the latest operational check card, visit the website below or contact your JVC dealer
.
http://www
.jvc-victor
.co.jp/english/pro/prodv/
Remo
ving car
d
1.
T
urn of
f the BR-DV6
000 power
.
2.
Press the EJECT
button of SA-DV6000 and remove the card.
EJECT
button
SA-DV6000
Card slot
CF memory card or LAN card
CH1
NDF
12
H
34
M
34
S
10
F
FREE CH2 PLA
Y
SP222
min
01/02/03 01:23:45
INS
AM
OV
E R
48k
T C
L
dB
0
10
20
30
40
OV
E R
W Y/C
VA
SYNC
‰ e
CF
e
C
F
Surface
5
Other than the use of a LAN card, this unit is also equipped with a LAN terminal for LAN connection.
Basic
Using LAN terminal
LAN cab
le types
●
When connecting directly to a PC, use a 10/100 BASE-T
cross cable.
●
When connecting to a network hub, use a 10/100 BASE-T
straight cable.
Connecting to the LAN terminal
Completely insert the connector of the LAN cable.
Caution
●
Do not remove the LAN cable when the Link LED is on. For a short time, menus cannot be opened.
●
Do not connect/disconnect the LAN cable when recording to a CF memory card.
●
Do not mount a LAN card when the Link LED is on. Link LED
The Link LED will light when connected to a network using the LAN terminal. When mounted with a LAN card, the Link LED will not light.
When using both LAN car
d and LAN terminal
When mounted with a LAN card, the LAN card will be given priority for LAN connection. In this case, communication via the LAN terminal is not possible.
Memo
When mounted with a CF memory card, the following can be performed: ●
T
ransferring of a clip recorded on a CF memory card to a server via the LAN terminal.
VIDEO
LINE IN OUT
MONIT
OR OUT
DC12V
DV IN/OUT
IN
OUT
OFF
A UDIO
REMO
TE2
IN
B-Y
R-Y
SYNC IN
TIME CODE
IN
OUT
Y
COMPONENT
OUT
CH 1/3
CH 2/4
IN OUT
MONIT
OR OUT
REMO
T E1
TIMER
REC
PLA Y
SERIAL REMO
TE
SIGNAL GND
Y/C
LAN
Link LED
LAN terminal
LAN cable