JVC GY-HM700U - Manual (Page 97)

93
Item Description
G ND Filter Position Displays the current ND filter position.
No display : [ND FILTER] is set to
AOFFB
ND1/4 : [ND FILTER] is set to A1/4B
ND1/16 : [ND FILTER] is set to A1/16B
Memo :
● You can turn ON/OFF the display using [Filter] of [Status Display...] in the [LCD/VF] menu.
( A Page 84)
H Remaining Space on
External Device Displays the remaining recording time of the external device (0 to 999). When the remaining time is running out,
this is indicated in red (value + unit of measurement) as a warning to the user.
Memo :
● Only warnings are displayed in the STATUS 0 and STATUS 4 Screens.
I Operation of External
Device Displays the operating status of the connected external device. For details, refer to the instruction manual of the
corresponding external device.
Memo :
● Only warnings are displayed in the STATUS 0 and STATUS 4 sScreens.
J Time Code (TC)/
User’s Bit (UB) Displays the time code (hour:minute:second:frame) or user’s bit data.
Memo :
● You can turn ON/OFF the display using [TC/UB] of [Status Display...] in the [LCD/VF] menu.
( A Page 85)
● You can select whether to display the time code or user’s bit using the [TC DISPLAY] switch on the inner panel of
the LCD monitor.
0 0 : 0 0 : 0 0 : 0 0
F F E E D D 2 0
Colon (:) for non-drop frames
Dot (.) for drop frames
Example: Time code:
User’s bit: