JVC GY-HM700U - Manual (Page 106)

102
Camera Features
The Skin Detail function can be used to reduce the contour
enhancement of video signals for only the skin areas so as to
produce a smoother skin tone.
Preparations Before Using the Skin Detail
Function (Skin Adjust Function)
1
Adjust the white balance. ( A Page 40)
2
Display the [Skin Color Adjust] screen. ( A Page 78)
● Select [Main Menu...]B[Camera Process]B[Detail]/
[Adjust...] B[Skin Color Adjust...], and press the Set button.
● The entire image switches to black-and-white display,
leaving only the detected skin areas in color.
Memo :
● The displays for [Bars], [Zebra], markers ([Aspect Marker]/
[Safety Zone]/[Center Mark]), [Focus Assist] mode, and [B & W]
mode in the [VF Display] menu are temporarily turned
AOffB.
ⅥHue Range Detection
1
Project the detected object inside the skin color
detection frame.
2
Place the cursor at [Skin Color Detect] with the cross-
shaped button ( J , K ).
3
Press the Set button.
Display switches from AStopB to AExecuteB, and detection
starts.
Memo :
● AErrorB is displayed if the object inside the frame is not
within the preset color range.
4
Press the Set button after the desired hue range is
detected.
● If no AErrorB is displayed, the data is saved and the process
ends.
● If AErrorB appears, the process ends without saving the data.
5
Place the cursor at [Back] after the hue range is
detected, and press the Set button.
Returns to the [Detail] menu screen.
ⅥColor Range Setting
1
Place the cursor at [Skin Color Range] with the cross-
shaped button ( J , K ).
2
Press the Set button or cross-shaped button ( I ) to
move the cursor to a setting value.
3
Select a setting value using the cross-shaped button
( J , K ), and press the Set button.
Select a setting within the [Narrow, -1 to -9, Normal, 9 to 1,
Wide] range.
4
Place the cursor at [Back] after setting is complete,
and press the Set button.
The data is saved, and the screen returns to the [Detail]
menu.
Using the Skin Detail Function
1
Set [Skin Detect] to AOnB. (A Page 78)
● Select [Main Menu...]B[Camera Process]B[Detail]/
[Adjust...] B[Skin Detect] and set to AOnB.
● AS.DTLB appears on the STATUS 0 and 1 Screens of the
LCD monitor and viewfinder when the Skin Detail function is
activated.
2
Set the adjustment level for the contour enhancement
of the skin tone. ( A Page 78)
Set using [Main Menu...] B[Camera Process]B[Detail]/
[Adjust...] B[Skin Color Detect]/[Level].
Smoothening the Skin
Color (Skin Detail
Function)
Skin Color
Detection Frame
2
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
SKIN AREA
S.DTL
B -3
ND1/16 A<3200K>
STBY
100min
100min
1280x720
24p HQ
OK
B
A
282min
30/24 fps
AS.DTLB appears
STATUS 1 Screen