JVC GY-HM700U - Manual (Page 79)

75
* Default values are indicated in bold characters.
FULL AUTO... Item
This is used to set specific functions to the auto mode when the [FULL AUTO] switch of the camera recorder is set to AONB.
Item Setting Values Function
SKIN A./SPOT M. Skin Area
Spot Meter
For assigning the function of the [SKIN AREA/SPOT METER] switch on the camera recorder.
Skin Area
: Assigns the Skin Detail function and its area display.
Spot Meter : Assigns the Spot Meter display function.
Memo :
● When ASkin AreaB is selected, [Skin Detect] is forcibly set to AOnB when the [SKIN AREA/
SPOT METER] switch is flipped, even if [Skin Detect] is set to AOffB. Alternatively, you can set
[Skin Detect] to AOffB, and turn the Skin Detail function On/Off by flipping the lever whenever
necessary. ( A Page 78)
SPOT METER Max&Min
Min
Max
Manual For specifying the operation of [Spot Meter]. ( A Page 51)
Max&Min : Displays the brightest and darkest areas of the image.
Min : Displays the darkest area of the image.
Max : Displays the brightest area of the image.
Manual : Displays the image brightness at a specified position.
Memo :
● This item is selectable when [SKIN A./SPOT M.] is set to ASpot MeterB. When ASkin AreaB is
set, this item appears as A---B and cannot be selected.
● Positions are detected automatically when this item is set to AMax&MinB, AMinB, or AMaxB.
When set to AManualB, it functions in a fixed position.
AE LEVEL AE LEVEL/VFR
AE LEVEL
Disable For specifying the operation of the cross-shaped button ( H, I) on the right of the camera
recorder.
AE LEVEL/VFR: Sets the number of frames during Variable Frame REC, and operates as the
AE LEVEL setting button in other cases. ( A Page 56)
AE LEVEL : Operates as the AE LEVEL setting button at all times.
Disable : Disables the button.
Item Setting Values Function
Gain SW Set
ALC
SW Set : Sets gain according to the [GAIN] selection switch.
ALC
: Sets gain to the AALCB (forced auto) mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at AALCB and cannot
be selected. ( A Page 116)
Iris Control Off
Auto
Off : Iris control is not performed.
Auto : Sets iris control to the forced auto mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at AAutoB and cannot
be selected. ( A Page 116)
● When the iris mode switch of the lens is set to AAB (auto), the iris is fixed at the point of time
when this item is switched from AAutoB to AOffB.
Shutter SW Set
EEI
SW Set : Sets shutter according to the switch.
EEI
: Sets shutter to the forced auto mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at AEEIB and cannot
be selected. ( A Page 116)
White Balance SW Set
FAW
SW Set : Sets white balance according to the [WHT.BAL.] selection switch.
FAW
: Sets white balance to the forced auto mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at AFAWB and cannot
be selected. ( A Page 116)
Bars Menu Set
Off
Menu Set : Sets color bar output according to the menu settings (via switch operation).
Off : Sets color bar output to the forced Off mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at AOffB and cannot be
selected. ( A Page 116)
Audio SW Set
Auto
SW Set : Sets the audio recording level according to the switch.
Auto
: Sets the audio recording level to the forced auto mode.