JVC GY-HM700U - Manual (Page 66)

62
Playback
For deleting clips.
Note :
● Clips appended with OK marks cannot be deleted on the
camera recorder.
● Read-only clips can be deleted on a PC.
Deleting One Clip
You can delete a selected clip with any of the following
operations.
A Press [USER2] button when menu is not displayed.
B Perform [Delete Clip...] B[One Clip] in thumbnail menu.
Memo :
● A clip cannot be deleted with the [USER2] button and menu
operation ([Delete Clip...] B[One Clip]) under the following
situations.
● A clip with OK mark is selected.
● Write-protect switch of the SDHC card is set (
is
displayed).
ⅥDuring Thumbnail Screen
Ⅵ Deleting with [USER2] button
1
Select the clip to delete.
Select the clip to delete with the cross-shaped button
(
JKHI ).
2
Press the [USER2] button.
A screen to confirm deletion appears.
3
Use the cross-shaped button ( JK ) to select [Delete]
and press the Set button ( R )
Deleting starts.
Memo :
● Button operations are unavailable during deletion. The
deleting operation cannot be canceled.
● The cursor moves to the next clip (or previous clip if a next
clip does not exist) after deletion.
Ⅵ Deleting with [Delete Clip...]B[One Clip] in the
menu
1
Select the clip to delete.
Select the clip to delete with the cross-shaped button
(
JKHI ).
2
Press the [MENU] button.
The thumbnail menu screen appears.
3
Select [Delete Clip...] B[One Clip] and press the Set
button.
A screen to confirm deletion appears.
Deleting Clips
[CANCEL] Button
[USER2] Button
[MENU] Button
Set Button ( R )
Cross-
Shaped
Button
(
JKHI )
1
3
1