JVC GY-HM700U - Manual (Page 77)

73
* Default values are indicated in bold characters.
Camera Function Menu
Item Setting Values Function
Bars On
Off
For setting whether to output color bars.
On
: Color bars are output.
Off : Color bars are not output.
Memo :
● When the [FULL AUTO] switch on the camera recorder is set to AONB, and [Bars] in the
[FULL AUTO...] menu is set to AOffB, this item is set to AOffB automatically. (A Page 75)
Shutter EEI
Variable
Step
For specifying shutter-related settings.
Use this item to set to
AStepB (fixed value) or AVariableB when operating with the cross-
shaped button on the right of the camera recorder. During automatic control, this is set to
AEEIB.
EEI
: Sets to automatic control.
Variable : Sets to variable scan. Use this setting such as when shooting a PC monitor.
Step
: Sets to step shutter, which switches the shutter speed by a fixed value.
AE LEVEL +3 to +1,
Normal,
-1 to -3
For setting the convergence level during AE (Auto Exposure).
This can also be adjusted using the the cross-shaped button (
H, I) on the right of the
camera recorder.
AE Speed Fast
Middle
Slow
For setting the convergence speed during AE (Auto Exposure).
ALC Limit 18dB
12dB
6dB
For setting the maximum gain value of AALCB, which electrically boosts the sensitivity level
according to the brightness automatically.
18dB : Sets the maximum ALC gain value to +18 dB.
12dB : Sets the maximum ALC gain value to +12 dB.
6dB
: Sets the maximum ALC gain value to +6 dB.
Auto Iris Limit
(OPEN) F5.6, F4, F2.8, F2,
F1.6,
F1.4
For setting the limit value of the OPEN end when auto iris is enabled.
Auto Iris Limit
(CLOSE) F16,
F11,
F8, F5.6,
For setting the limit value of the CLOSE end when auto iris is enabled.
EEI Limit 4F-stop
3F-stop
2F-stop For setting the shutter speed control range when EEI is enabled.
4F-stop : Moves iris control by 4 f/stops in EEI.
3F-stop : Moves iris control by 3 f/stops in EEI.
2F-stop : Moves iris control by 2 f/stops in EEI.
Smooth Trans Fast
Middle
Slow
Off
For setting the shock reduction function, which slows down the sudden change when
switching with the [GAIN] or [WHT.BAL.] selection switch.
However, this function is disabled when the [FULL AUTO] switch of the camera recorder is
set to
AONB, or when switching the gain selection switch while AALCB is set.
Fast : Runs the Smooth Trans function at high speed.
Middle : Runs the Smooth Trans function at medium speed.
Slow
: Runs the Smooth Trans function at low speed.
Off : Deactivates the Smooth Trans function.
Switch Set... For specifying the switch settings of the camera recorder. ( A Page 74)
FULL AUTO... For specifying settings when the [FULL AUTO] switch of the camera recorder is set to AONB. (A Page 75)