JVC LVT1112-001A - Manual (Page 38)

34
Using the DVD MULTI playback mode
This receiver provides the DVD MULTI playback mode for reproducing
the analogue discrete output mode (5.1 channel reproduction) of the
DVD player.
In addition, the DVD MULTI playback mode can be used for
reproducing a DVD Audio sound.
Before playing back a DVD, refer also to the manual supplied with the
DVD player.
• When using the DVD MULTI playback mode, connect the DVD
player with its analogue discrete output jacks to the DVD IN jacks on
the rear panel (see page 10).
When operating this receiver using the remote
control, always set the mode selector to
AUDIO/TV/VCR/STB.
Activating the DVD MULTI playback mode
On the front panel:
1
Turn SOURCE SELECTOR until “DVD MULTI”
appears on the display.
The DVD MULTI indicator lights in red.
2
Select the analogue discrete output mode on the
DVD player, and start playing a DVD.
From the remote control:
1
Press DVD MULTI.
The DVD MULTI indicator lights in red.
2 Select the analogue discrete
output mode on the DVD player,
and start playing a DVD.
Adjusting the speaker output level
You can adjust the speaker output level while playing a DVD using the
analogue discrete output mode on the DVD player.
Once you have adjusted the sound, the adjustment is memorized.
• The test tone does not output through the speakers to adjust the
speakers output levels when selecting DVD MULTI.
From the remote control:
It will be convenient for you to use the remote control for the sound
adjustments, since you can make adjustments from your listening point.
Adjust the following speaker output
levels (from –10 dB to +10 dB).
• Make adjustments so that the sound level of the
selected speaker is set at the same level as that
of the front speakers.
To adjust the center speaker level,
press CENTER +/–.
To adjust the left surround speaker level,
press SURR L +/–.
To adjust the right surround speaker level,
press SURR R +/–.
ANALOG
SUBWFR LFE
VOL
L C R
LS RS
BASS TREBLE
PANORAMA
B.BOOST ATT (Back to the beginning)
SUBWFR
SURR R
EFFECT
SURR L
BAL
CENTER
On the front panel:
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step
1 again.
1
Press ADJUST.
MULTI JOG now works for the sound adjustment.
2 Turn MULTI JOG until the setting item you want
to set appears on the display, then press SET.
• As you turn MULTI JOG, the indication changes as follows:
CENTER*: To adjust the center speaker output level
(from –10 dB to +10 dB).
SURR L*: To adjust the left surround speaker output level
(from –10 dB to +10 dB).
SURR R*: To adjust the right surround speaker output level
(from –10 dB to +10 dB).
* “0 (dB)” is the initial setting.
3 Turn MULTI JOG to adjust the item selected in
step
2, then press SET.
Your setting is stored.
• Make adjustments so that the sound level of the selected
speaker is set at the same level as that of the front speakers.
Ex.: When selecting “+8 (dB)” for “CENTER.”
4
Repeat steps 2 and 3 to adjust the other
settings.
NOTES
• When you select DVD MULTI as a source to play, the selected
Surround/DSP mode is canceled, and the SURROUND button does
not work.
• When using a pair of headphones, the sounds of front left and right
channels are output from the headphones.
• The DVD MULTI button does not work for TV Direct.
STANDBY / ON STANDBY
TV DIRECT SETTING ADJUST SURROUND
DVD MULTI DVD STB VR TV FM / AM
SET / TUNER PRESET SOURCE SELECTOR MASTER VOLUME
PHONES / MULTI JOG
ANALOG
SUBWFR LFE
VOL
L C R
LS RS
STANDBY / ON STANDBY
TV DIRECT SETTING ADJUST SURROUND
DVD MULTI DVD STB VR TV FM / AM
SET / TUNER PRESET SOURCE SELECTOR MASTER VOLUME
PHONES / MULTI JOG
DVD
AUDIO/TV
/VCR/STB
TV DIRECT
DVD VCR STB TV
DVD VR STB TV
DVD MULTI
TV VOL CHANNEL
TUNING TUNING
DVD
AUDIO/TV
/VCR/STB
FM MODE
VOLUME
FM/AM TV/VIDEO MUTING
AUDIO
AUDIO
ZOOM
ANGLE
REPEAT
DIMMER
SUBWFR CENTER L R SURR
BASS BOOST A.POSITION SMART S. SETUP
SLEEP CANCEL
SURROUND
ANALOG/DIGITAL
TV RETURN 100+
BASS TREBLE
SUBTITLE RETURN TITLE/GROUP
BASS TREBLE
1 2 3
4 VFP
INPUT
TONE
TEST EFFECT DECODE
5 6
7 8 9
10
3D
0 +10
28-34_RX-ES9SL[B]f 03.6.27, 16:46 34