JVC DM-NC40 - Manual (Page 49)

49
Operations
Operating the CF card
Operating in the CF CARD SETUP screen
In the CF CARD SETUP screen, the CF card can be formatted and image files can be deleted.
Login as an administrator to perform settings. (
੬
See “3-3 Launching the Browser”, page 26)
Delete
When clicking “Del Files”, selected image files
are deleted.
Format
When clicking “Format”, formatting of the CF
card will start.
• FAT32 or Ext2 can be selected as file system for formatting CF card. Ext2 is recommended because of robustness.
However, the Ext2 format cannot be read by Windows. When using a CF card reader with Windows, format the CF
card using the FAT32.
• When deleting, all files in the jpeg-1 and jpeg-2 directories of each Alarm directory will be deleted.
• The unit does not support hot-swap of CF card. Turn off the power when inserting/removing a CF card.
Format See Delete
CF CARD SETUP screen ࠗ – ࠗ
Card reader – ࠗ ࠗ
Via FTP – ࠗ ࠗ
Number of files for each alarm (total number
in jpeg-1 and jpeg-2 directories) is displayed.
(For jpeg-1- and jpeg-2, ੬ see page 50)
When “Log Record” is enabled, log data is
stored in the CF card.
ࠗ : Allowed, – : Not allowed
JPEG files can be recorded to the CF card. Formatting CF card and deleting JPEG files are
available from Web browser. Seeing JPEG files is available from PC.
* Do no delete CF files during connection.