Step 2 pc network setup, Setting the ip address of the pc, For windows xp) – JVC DM-NC40 User Manual
Page 20: Step 2, Pc network setup
20
1.
Click
•
Right click “My Network” and select
.
2.
Select the network of the PC that will be used for Web browser operations
•
Right click and select
.
3.
Select “Internet Protocol (TCP/IP)” and click
2-1 Setting the IP Address of the PC (For Windows XP)
When connection and installation are completed, the IP address of the PC controlling the unit
is set.
For Windows XP, perform the setting using the steps shown below.
(For Windows 2000,
੬
see
page 22)
Step 2
PC Network Setup
Confirm that the checkbox is selected.
Memo
If “Client for Microsoft Network” and “Internet
Protocol(TCP/IP)” are not displayed, perform “Install
(N)...”.
1 Select “Internet Protocol (TCP/IP)”.
2 Click
.