Preparation flow, Step 1, Step 2 – JVC DM-NC40 User Manual
Page 12: Step 3, Step 4, Step 5, Step 6, Connection/installation, Pc network settings, Launching the web browser

12
Preparation Flow
Perform settings using the steps shown below.
Step 1
Connection/Installation
•
Connect cables to the back of the unit.
•
For recording, insert a CF card
•
When completed, turn on the power.
੬
Page 13 ~
Step 2
PC Network Settings
•
Network settings for the unit have been performed at the time of shipment.
First, perform network settings for the connecting PC.
੬
Page 20 ~
Step 3
Launching the Web Browser
•
Launch the Web browser and input the IP address of the unit (Factory setting
of IP address, 10.0.0.1, is enabled if there is no DHCP server in the LAN.)
•
Login as the administrator. Input the user name and password for administrator.
੬
Page 24 ~
Step 4
Initial Settings
•
Change IP address of the unit according to the network environment.
You need reconnect Web browser with new IP address after changed.
•
Set the date and time to the unit.
੬
Page 27 ~
Step 5
Mode Setting
•
Select mode of the unit according to the application.
(
੬
See “1-1 Connection Examples”, page 13)
੬
Page 29 ~
Step 6
Detailed setup
•
Perform detailed setup for each application.
੬
Page 30 ~
About the ISMA Server Mode
•
ISMA-compliant player is available with the ISMA Server mode.
੬
For details, please consult the person in
charge of professional equipment at your
nearest JVC-authorized service agent.