JVC DM-NC40 - Manual (Page 39)

39
Preparations
6-6 OUTPUT PIN SETUP screen
The polarity of output pins can be set on the OUTPUT PIN SETUP screen. Click Output Pin
Setup on the left of the Network Codec screen to display the OUTPUT PIN SETUP screen.
Select the
screen
Select one for each item
Click to confirm
settings.
Item Content Default value
Output Pin 1 ~ 8 High Set high or low to output pins in the alarm port.
High: Outputs high level
Low: Outputs low level
(Outputs are TTL level.)
* These output pins are not alarm output of the unit.
These output pins are available to control external devices.