JVC DM-NC40 - Manual (Page 30)

30
Item Content Default value
Address Setup
Manual: Set the address according to the used environment.
DHCP
DHCP: Address is acquired from the DHCP server.
* Changing from DHCP to Manual is possible from Web browser, but
you need to use API command to change from Manual to DHCP.
For details concerning API commands, see the Command
Table of page 54.
* During DHCP is enabled, IP Address, Subnet Mask, Default
Gateway, Domain Name and DNS Server settings cannot be
set from Web browser.
Set the IP address.
IP Address
IP address is noted using 4 decimal numbers.
10.0.0.1
When the IP address is changed, reconnect from Web browser
using the new IP address for more settings.
Subnet Mask
Set the subnet mask.
255.0.0.0
The subset mask is noted using 4 decimal numbers.
Set the default gateway.
Default Gateway
The default gateway is noted using 4 decimal numbers.
10.0.0.254
If you failed to set default gateway address, try again from setting
of IP address.
If there is no default gateway, enter “0.0.0.0”.
Network related settings can be made on NETWORK SETUP screen. Click Network Setup
on the left of the Network Codec screen to display the NETWORK SETUP screen.
6-1 NETWORK SETUP screen
Step 6 Detailed Setup
Mandatory settings (be sure to perform)
For details of network settings, ask to network administrator.
Select the
screen
Enter
Enter
Click to confirm
settings
Multicast is stopped when
current mode is changed to
another.