JVC DM-NC40 - Manual (Page 22)

22
1.
Click .
• Click “Settings” → “Network and dialup connections”.
2.
Select “Local Area Connections”
• Right click and select .
3.
Select “Internet Protocol (TCP/IP)” and click .
2-2 Setting the IP Address of the PC (For Windows 2000)
When connection and installation are completed, the IP address of the PC controlling the unit
is set.
For Windows 2000, perform the setting using the steps shown below.
(For Windows XP,
੬
see
page 20) .
Step 2 PC Network Settings
(Continued)
1 Select “Internet Protocol (TCP/IP”).
2 Click .
1 Click
.