JVC LX-P1010ZE - Manual (Page 67)

67 Previous
screen
Lamp replacement period
The LCD Projector lamp has a limited
operating life of approximately 2 000
hours.
If lamp operation time exceeds 1 900
hours, “
L-1 ” is displayed as the STATUS
Code.
“Lamp replacement is recommended.”
will be displayed on-screen when
operation time reaches 1 900 hours.
Warning
Lamp Replacement (To retailers)
If the lamp does not illuminate and the status
code “
L-n ” is displayed, try switching on the
lamp two or three times. If the lamp still does
not illuminate, the lamp may be broken. Do
not attempt to replace the lamp, as there is a
risk of injury on broken lamp fragments. Call
the JVC service center for repairs.
• When the lamp operation time has exceeded 1 900 hours, a
warning will appear for 15 seconds when the LCD Projector
power is turned on.
Lamp replacement is
recommended.
STATUS Code display
Take the LCD Projector to your dealer for repair.
(Order Lamp BHNPETLAC50.)
Continued on the next page...