JVC LX-P1010ZE - Manual (Page 55)

55 Previous
screen
When a signal less than 800 X 600 dots signals is input, the
LCD Projector automatically enlarges the image to 800 X 600
dots. This may cause picture quality degration. For better
image, select Expansion: OFF by the following procedure.
The procedure and on-screen display as shown below are
based on RGB as the input signal from a personal computer.
Canceling enlarging (scanning line
conversion) function
• Setting procedure
1
Press MENU to
display the menu.
3
Press or to
select “Expansion”.
4
Press or to select
“ON” or “OFF”.
• Select “OFF” to
cancel enlarge
(scanning line
conversion)
function.
• Select “ON” to use
enlarge (scanning
line conversion)
function. (This is the
factory setting.)
Picture
White Balance
Synchronization
Function
Language
Information
RGB/YP
B
P
R
Projection Mode
Expansion
On Screen Display
Auto Lamp Off
Standard (Push ENTER)
•RGB •YP
B
P
R
•Front •Rear
•ON •OFF
•ON •OFF
•YES •NO
Function
2
Press or to
select “Function”,
and then ENTER to
display the screen.