JVC LX-P1010ZE - Manual (Page 26)

26 Previous
screen
There are two ways of installing this projector as shown next page .
This section explains the standard case of the floor-mounted front
projection.
(The projection method can be set from the MENU screen. Refer to
the “
Changing the Projection Mode ”.)
• Refer to “ screen size and required distance ”.
• Select a room that can be darkened.
• This unit’s specification is not intended for suspension, so do not
install it in a suspended manner.
Preparation
Setting-up Positions
Caution: When you set up the LCD Projector
• Do not place it in humid or dusty places, or places where the air
is sooty or full of cigarette smoke. If the lens, mirror, or other
optical components become dirty, the picture will blur or darken,
making viewing difficult.
• Do not expose to extreme heat or cold. Permissible operating
temperature: 0 ºC – 40 ºC (32 ºF – 104 ºF)
Continued on the next page...