JVC LX-P1010ZE - Manual (Page 30)

30 Previous
screen
If the power cord is removed while the cooling fan is running,
or you project immediately after turning on the power, such
problems as damaging of the light source lamp or reduced
illumination may occur. Be sure to follow the below procedure
for turning the power “On” and “Off.”
POWER Button
POWER Button
Turning the power on and off
POWER Indicator
STANDBY(RED)
ON(GREEN)
Note
• Insert Power Cord into LCD Projector AC socket and
connect to properly grounded wall outlet.
• When power is turned off, the cooling fan continues to
operate (approximately 2 minutes) in order to cool the
projector interior.
• This unit consumes approx. 15 W in OFF condition when
plugged into an AC outlet.
(Supplied)
Continued on the next page...