JVC LX-P1010ZE - Manual (Page 53)

53 Previous
screen
The function which displays the currently selected input signal
on the screen can be turned off by the following procedure.
Freeze displays will also be turned off.
The procedure and on-screen display as shown below are
based on RGB as the input signal from a personal computer.
Turning off the input signal display
1
Press MENU to
display the menu.
3
Press or to select
“On Screen Display”.
4
Press or to select
“ON” or “OFF”.
• Select “OFF” to turn
off the input signal
display function.
• Select “ON” to turn
the input signal
display function. The
input signal will be
displayed each time
it is changed. (This
is the factory
setting.)
Picture
White Balance
Synchronization
Function
Language
Information
• Selecting procedure
RGB/YP
B
P
R
Projection Mode
Expansion
On Screen Display
Auto Lamp Off
Standard (Push ENTER)
•RGB •YP
B
P
R
•Front •Rear
•ON •OFF
•ON •OFF
•YES •NO
Function
2
Press or to select
“Function”, and then
ENTER to display the
screen.