JVC LX-P1010ZE - Manual (Page 31)

31 Previous
screen
Press POWER Button on the LCD Projector or remote
control unit.
1
The power indicator will flash, then turn solid green and a
picture will be projected onto the screen.
The LCD Projector cannot be turned on for 2 minutes
after turning it off.
Turning on the power
Turning the power on and off
Note
2
Press POWER Button on the LCD Projector or remote
control unit. “Please press POWER button again to power
off.” is displayed on the screen, and then press POWER
Button again.
1
Turning off the power
3
Wait for the cooling fan to stop.
The power indicator changes to solid red, the cooling fan
stops, and the projector goes into Stand-by mode. (After
about 2 minutes)
The power indicator will illuminate flashing red.
2
POWER Button
POWER Button
POWER Indicator
STANDBY(RED)
ON(GREEN)