JVC VN-V686WPU User Manual
Page 71
71
Memo
:
● When the power of VN-V686WPU shuts down accidentally during multicast transmission, multicast
transmission will restart automatically after VN-V686WPU is rebooted.
JPEG
A
Control
For starting or stopping streaming of JPEG images.
Parameters that are set on the [Streaming] page will be saved when
transmission is started upon pressing the [Start] button.
B
Destination
Address
For specifying the destination address of JPEG streaming.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that each of them is set to a different
multicast address.
C
Destination Port
For specifying the destination port number of JPEG streaming.
Specify an even number for RTP compliance.
When other devices that make use of multicast transmission exist, it is
recommended that each of them be set to a different port number.
Multiple multicast streams cannot be received on a single computer when
there are duplicate port numbers.
D
Frame Rate
For specifying the frame rate when sending JPEG images via multicast.
MPEG4
E
Control
For starting or stopping streaming of MPEG4 images.
Parameters that are set on the [Streaming] page will be saved when
transmission is started upon pressing the [Start] button.
F
Destination
Address
For specifying the destination address for MPEG4 streaming.
Specify the multicast address. When other devices that make use of
multicast transmission exist, ensure that each of them is set to a different
multicast address.
G
Destination Port
For specifying the destination port number for MPEG4 streaming.
Specify an even number for RTP compliance.
When other devices that make use of multicast transmission exist, it is
recommended that each of them be set to a different port number.
Multiple multicast streams cannot be received on a single computer when
there are duplicate port numbers.
VN-V686WPU_EN.book Page 71 Friday, February 8, 2008 5:20 PM