JVC VN-V686WPU User Manual
Page 39
39
C
Black Level
For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.
[Setting range : 0 to 2]
Memo
:
● If the black level is set to A0B, this may be too low depending on the
connected device, or dark area will become complete black.
● When using MPEG4 images, set to either A1B or A2B.
D
Gamma
To alter the appearance of dark areas in a video image, adjust the gamma curve.
0
: Gamma correction suitable for CRT is performed.
1
: Gamma correction suitable for some LCDs is performed.
2
: Do not perform gamma correction. This setting is suitable for some
LCDs.
Active : The most appropriate gamma correction is applied according to the
darkness of the screen. Select the level under [Active Gamma Level].
[Setting values : 0, 1, 2, Active]
Memo
:
● The set value is fixed when the [Monitor Type] B is set to ALCD1B, ALCD2B,
or
ACRTB.
Active Gamma
Level
This adjusts the effect when [Gamma] D is set to
AActiveB.
Objects with little luminance differenceBDecrease the number
Objects with large luminance differenceBIncrease the number
[Setting range : -5 to 0 to 5]
Memo
:
● The color may appear different from the actual one depending on the object.
● Noise interference and hue changes may appear prominent depending on the
brightness of the object but this is not a malfunction.
● This feature can only be configured when [Gamma] D is set to AActiveB.
E
Enhance
Frequency
For setting the type of edge enhancement.
Low
: Enhanced edges become thicker.
High
: Enhanced edges become thiner.
[Setting values:Low, High]
Memo
:
● The set value is fixed when the [Monitor Type] B is set to ALCD1B, ALCD2B,
or
ACRTB.
F
Enhance Level
For setting the intensity of edge enhancement.
Larger value
: Increases the intensity of edge enhancement.
Smaller value
: Decreases the intensity of edge enhancement.
[Setting range : -5 to 0 to 5]
G
Color Level
For adjusting the color level.
Larger value
: Increases the color level.
Smaller value
: Decreases the color level.
[Setting range : -5 to 0 to 5]
VN-V686WPU_EN.book Page 39 Friday, February 8, 2008 5:20 PM