Mpeg4 viewer (continued) – JVC VN-V686WPU User Manual

Page 102

102

Settings and operation of Built-in viewer

Title Bar Display
Settings

For setting display items on the viewer screen.
For the MPEG4 Viewer, characters are displayed in the title bar of the
window.

Camera ID

Select

AOnB to display [Camera ID]. (Up to 16 alphanumeric characters

will be displayed.)
[Camera ID] can be specified on the [Camera] page of VN-V686WPU.
(A Page 38)

DispPositionTitle

Select

AOnB to display the title of the position that is being displayed.

Time

Select

AOnB to display the time.

Format

Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.

Stream Settings

For specifying settings for receiving MPEG4 stream.

Stream

For selecting the protocol when the viewer acquires data from VN-
V686WPU.
When

AHTTPB is selected, lost packets are recovered via resending. VN-

V686WPU may be monitored using multiple viewers when

AMulticastB is

selected.

Memo

● When playing back via multicast, start multicast sending on the

Streaming page of the VN-V686WPU unit.
[Streaming Page] (A Page 70)

Note：

● When Built-in viewer is launched with AMulticastB specified, a Windows

firewall warning may appear. In this case, select

AunblockB and proceed.

● If AblockB is selected, the Windows firewall will block the multicast stream

and playback of multicast by the viewer will fail.

HTTP Port

You can change the HTTP port number.
The default port number setting is 80.
Specify the same value as the parameter that is set on the Protocol page
of VN-V686WPU. (A Page 69)

Multicast IP
Address

You can change the multicast IP address.
The default address is 225.0.2.1.

VN-V686WPU_EN.book Page 102 Friday, February 8, 2008 5:20 PM