JVC VN-V686WPU - Manual (Page 40)

40
Setting Using Internet Explorer
Camera Page (continued)
Setting (continued)
A
B
C
D
E
F
G
H
I
J
K
M
L
H Stabilizer This function prevents image shaking caused by vibration.
Set this function to
AOnB to control image shaking.
Off : Disabled.
On : Enabled.
Memo :
● When the function is set to AOnB, the screen is enlarged to approximately 1.3
times.
● Adjustment is disabled in the electronic zoom area.
● Adjustment is disabled for about 1 minute after power ON and during Pan/Tilt/
Zoom operation.
● Adjustment may not work when the vibration is fast. The effect can be small
when vibration direction does not match with Pan/Tilt position. Depending on
the installation environment, the stabilizer may malfunction and increase
image shaking due to the vibration transmitting to the camera. In this case,
set the stabilizer to
AOffB.
VN-V686WPU_EN.book Page 40 Friday, February 8, 2008 5:20 PM