JVC VN-V686WPU - Manual (Page 69)

69
Protocol Page
This page is for changing the HTTP server port number.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.
Memo :
● If Built-in viewer is used for playback, change the [HTTP Port] number in the setting screen of Built-in
viewer to the same value. (A Page 97)(A Page 102)
A
A HTTP Server
Port You can change the port number for the built-in web server of VN-V686WPU.
(1-65535)
The default port number setting is
A80B. The port number of JPEG/MPEG4
server is changed also.
To access to VN-V686WPU from the Internet Explorer, enter the following in
the Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to
A8080B, for example, enter the Internet
Explorer as follows.
http://192.168.0.2:8080
VN-V686WPU_EN.book Page 69 Friday, February 8, 2008 5:20 PM