JVC VN-V686WPU - Manual (Page 33)

33
3
If ActiveX controls and plug-ins of the Internet Explorer is disabled, follow the steps
below to enable it
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Click on the [Sites…] button
directly below, followed by deselecting the check [in the displayed window]. Add the following web
site to the zone.
http://192.168.0.2
● Click [Trusted sites] under [Tool]-[Internet Options]-[Security]. Select the [Custom Level] button
and open the [Security Settings] window. Set all items under [ActiveX controls and plug-ins] in
the opened window to [Enable]. Enable also [Use the following IP address] under
[Miscellaneous].
4
Disable pop-up block
Connection of VN-V686WPU cannot be established when pop-up block in the Internet Explorer is set to
AEnableB.
Follow the steps below to set the pop-up block to AdisableB.
● Selecting [Tool]-[Pop-up Blocker]-[Turn Off Pop-up Blocker] permits all sites.
● To allow only specific sites such as VN-V686WPU, select [Tool]-[Pop-up Blocker]-[Turn On Pop-up
Blocker], followed by selecting [Tool]-[Pop-up Blocker]-[Pop-up Blocker Settings] that becomes active to
open the [Pop-up Blocker Settings] window.
In the opened window, add the address of VN-V686WPU as a permitted web site address.
5
When plug-in tools such as the Yahoo or Google toolbar are included in the Internet
Explorer, disable the pop-up block function of these plug-in tools as well
VN-V686WPU_EN.book Page 33 Friday, February 8, 2008 5:20 PM