JVC VN-V686WPU - Manual (Page 67)

67
A IP Setting For setting the DHCP client function.
Connect VN-V686WPU to a network environment with a DHCP server when
DHCP is to be enabled.
If the DHCP server does not exist when DHCP is set to
AEnableB, VN-
V686WPU will start running with the 192.168.0.2 IP address and
255.255.255.0 subnet mask in about 2 minutes after startup.
Refer to [IP Address Settings] (A Page 26) for the IP address.
B IP Address For setting the IP address of VN-V686WPU.
C Subnet Mask For setting the subnet mask of VN-V686WPU.
D Default Gateway For setting the default gateway of VN-V686WPU.
Set as
A0.0.0.0B when a default gateway is not set.
E Host Name For setting the host name of VN-V686WPU.
Specify a name using alphanumeric characters, hyphen (-) or period (.).
Underscores (_) cannot be used.
F DNS Server For setting the address of the DNS server.
G MAC Address The MAC address of VN-V686WPU is displayed in a hexadecimal number.
VN-V686WPU_EN.book Page 67 Friday, February 8, 2008 5:20 PM