Intel Arima LH500 - Manual (Page 68)

68
When
is pressed Press switch to the POST screen and take one of two
actions:
1.
If MultiBoot is installed, the boot process continues with the
POST screen until the end of POST, and then displays the
Boot First Menu, text-based with these options:
A: Load the operating system from a boot device of your
choice.
B: Enter Setup.
C: Exit the Boot First Menu (with ) and load the
operating system from the boot devices in the order
specified in Setup.
2.
If MultiBoot is not installed, the boot process continues as
usual.
Press to
enter Setup Press at any time during POST switch to the POST screen
(if not already displayed) and enters Setup.
POST issues
an error
message Whenever POST detects a non-fatal error, QuietBoot switches to
the POST screen and displays the errors. It then displays this
message:
Press to resume, to Setup
Press to continue with the boot. Press if you want
to correct the error in Setup.
The BIOS or
an option
ROM requests
keyboard input If the BIOS or an Option ROM (add-on card) requests keyboard
input, QuietBoot switches over to the POST screen and the
Option ROM displays prompts for entering the information.
POST continues from there with the regular POST screen.