Intel Arima LH500 - Manual (Page 59)

59
3.5.6 IPMI Sub Menu
The IPMI Sub Menu looks like the following:
PhoenixBIOS Setup Utility
Advanced
IPMI Item Specific Help
BMC/Scorpio Configuration
IP Address [192.168.254.001]
Subnet Mask [255.255.255.000]
Default Gateway [192.168.254.254]
IPMI Specification Version (Unknown)
BMC Firmware Version (Unknown)
System Event Logging [Enabled]
Existing Event Log number 0
Remaining Event Log number (Unknown)
Event Log Control
SYS Firmware Progress [Disabled]
BIOS POST Errors [Enabled]
BIOS POST Watchdog [Disabled]
OS boot Watchdog [Disabled]
Timer for loading OS (min) [10]
Time out action [No Action]
Date Format to show [MM DD YYYY]
Date Separator [ . ] Display IP Address
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit ←→Select Menu Enter Select►Sub-Menu F10 Save and Exit
The following table shows the items that you can customize on the IPMI sub-menu page:
Item Options Description
IP Address
Subnet Mask
Default Gateway No options. Display/Set IP Address, Subnet
Mask, and Gateway.
System Event Logging Disabled
Enabled Enable/Disable IPMI event
logging. Disabling will still log
events received via the system
interface.
SYS Firmware Progress Disabled
Enabled Enabling this selection will log
POST Progress.
BIOS POST Errors Disabled
Enabled Enabling this selection will log
POST errors.
BIOS POST Watchdog Disabled
Enabled Enabling this selection will
enable POST watchdog.
OS boot Watchdog Disabled
Enabled Enabling this selection will
enable OS Boot watchdog.
Timer for loading OS (min) 1~100 Timer value for watchdog timer.
Time out action No Action
Reset
Power Off
Power Cycle Determines what action to take
if OS fails to boot.