IBM Print System QMS 4032 - Manual (Page 52)

82
''
» Note: You may need to press the Next button more than once to advance through the
list of options.
The printer must be off line and idle before you can access the configuration menu.
%
Once you access the configuration menu, you use the control panel buttons to move
through the menu. Use the following buttons:
%/&
To change the default printer emulation from ESP to PostScript for the parallel port,
press the control panel buttons in the order shown in the following table.
» Note: You may need to press the Next button more than once to advance through the
list of selections or options.
Press this button to... The message window
reads...
Online Turn off the Online indicator and
ready the printer for configuration. IDLE
Menu Access the configuration menu. CONFIGURATION
OPERATOR CONTROL
Press this button to...
Next Advance to the next option or submenu within a menu.
Previous Return to the previous option or submenu within a menu.
Select Select an option or enter a submenu.
Press this button to... The message window
reads...
Online Turn off the Online indicator and
ready the printer for configuration. IDLE