Introduction, Finding a good location, Location requirements – IBM Print System QMS 4032 User Manual
Page 18: Introduction -2, Finding a good location -2, Location requirements 2-2
#"
This chapter explains how to set up your printer for the first time. It includes informa-
tion on finding a good location for the printer, unpacking and checking the shipment
contents, installing consumables (toner cartridge), loading the media cassettes, turn-
ing the printer on, and printing a start-up page.
,-
Away from cooling and heating sources, extreme temperature changes, direct
sunlight, excessive dust, corrosive chemicals or vapors, water pipes, refrigerators,
and any strong electromagnetic field (such as that created by an air conditioner),
Away from items that can easily burn (such as curtains) and items that produce
excessive vibration.
In an area with a temperature range of 41°–95° F (5°–35° C) and relative humidity
range of 15%–85%.
On a hard, level surface capable of supporting the 91 lb (41 kg) printer.
Near your computer—6.5' (2 m) or less for an IEEE 1284 bi-directional parallel
connection; cables for other connections may be longer.
Close to an easily accessible power supply. Don’t connect it to the same electrical
outlet as noise-generating equipment.
In a well-ventilated room.
With enough space to allow adequate ventilation and easy servicing.