IBM Print System QMS 4032 - Manual (Page 25)

#''
'
82
123
.
$!
1
Follow the instructions in the Quick Setup Guide included with your printer shipment to
install the toner cartridge and paper. Use the Quick Setup Guide - Options to install
options included with your shipment.
» Note: Remember to turn off the printer before you install an option.
2
1 Make sure the printer is turned off.
2 Plug the printer into a grounded, surge-
protected, electrical outlet.
3 Turn on the printer.
Press in the power button next to the control
panel. After a brief warm-up (typically
3 minutes) the printer produces a start-up
page. More information about start-up pages
is included in the
Reference manual.
» Note: The number of sheets/faces printed statistics on the start-up page will differ
from the number of sheets/faces printed statistics in CrownView and on the
consumables statistics page (Operator Control/Consumables/Print Statistics). The
numbers on the start-up page refer to the number of sheets/faces printed during
the life of the printer. The numbers in CrownView and on the consumables
statistics page refer to the number of sheets/faces printed to date during the
current consumables tracking period (Administration/Consumables/Start Period
menu).
4 If the start-up page doesn’t print or the print quality is not good, see chapter
5,“Troubleshooting Setup.”