Integra DTR-10.5 - Manual (Page 65)

65
Operations
Enjoying Multichannel Playback —Continued
You can also set the listening mode in advance for mul-
tichannel playback (Listening Mode Preset). To do so,
select “Input Setup”
→
“Listening Mode Preset”
→
“Multichannel” on the Setup menu to choose the pre-
ferred mode. This defaults to “Multichannel.”
See page 59 for details of the listening mode, and page
97 for the listening mode preset.
To configure the listening mode settings including
audio effect and playback options:
You can specify detailed settings for the decode mode
and the speaker environment for multichannel playback
(Listening Mode Setup). See page 102 for details.
Hint:
The volume level of each speaker for multichannel
sounds is different from the calibration level to be set
with the test sound described on page 90. Adjustment
made here is not reflected in playing other than the mul-
tichannel playback.
Playing Back in Multichannel Sound
1 Press the [Input] button, and then roll the
scroll wheel to select the input source to
be set.
2 Press the scroll wheel, and then press
(repeatedly) the [Audio SEL] button to
select “Multich.”
3 Start playing.
4 Adjust the volume level with the [VOL ]
buttons.
You can adjust the volume level in the range from
–
∞
, –81.5 dB to 18.0 dB (when Relative is set for
Volume Setup).
Hint:
You can also adjust the volume level with the
input source button, the [Audio Selector] button,
and the [Master Volume] dial on the DTR-10.5.
PQRS TUV WXYZ
Caps Delete Language Loca t ion
Album Ar tist Genre Playlist
Repeat Video Music Photo
--/--- Direct Tuning
#
Custom
Display
Dimmer
T V
Input
Sleep
Random Main A Main B
Muting
Angle Subtitle Audio
Memory Search A-B Repeat
T V VOL
Exit Gu ide
Rec
Last Memory
Prev
CH Set up Retu
rn
Test Tone CH SEL
Pure A
Surround
Direct
Stereo
Re-EQ
THX All CH ST
Level + Level -
L Night Audio SEL
DSP DSP
+10 0 Clear
7 8 9
To p M enu Men u
VOL CH
Disc
+
-
Zone 3
Zone 2
Input Mode
Macro
Se rve r Aud io A D J
Enter
Input
Audio SEL
VOL /
RC-556M
Scroll wheel
Adjusting the Volume Level of
Speakers for Multichannel Playback
1 Press the scroll wheel, and then press the
[CH SEL] button to select a speaker
whose volume level you want to adjust.
Speakers set by the Speaker Configuration sub-
menu on the Speaker/Output Setup menu are dis-
played on a one-by-one basis.
2 Press the [Level –/+] button to adjust the
volume level.
You can adjust in the range from –12 dB to +12
dB. The subwoofer can be adjusted in the range
from –15 dB to +12 dB.
Caps Delete Language Loca t ion
Album Ar tist Genre Playlist
Repeat Video Music Photo
Display
Random Main A Main B
Muting
Angle Subtitle Audio
Memory Search A-B Repeat
Exit Gu ide
Rec
Last Memory
Prev
CH Set up Retu
rn
Test Tone CH SEL
Pure A
Surround
Direct
Stereo
Re-EQ
THX All CH ST
Level + Level -
L Night Audio SEL
DSP DSP
VOL CH
Disc
+
-
D J
Enter
CH SEL
Level –/+
RC-556M