Connecting the power/basic operations, Turning on the power, Operating on the dtr-10.5 – Integra DTR-10.5 User Manual
Page 52: Push to enter, Rec/ zone 3 red ) ( main blue ( ) zone 2 green ( )

52
Connecting the Power/Basic Operations
• Before you plug in the DTR-10.5, confirm that all connections have been made properly.
• Turning on the power may cause a momentary power surge, which might interfere with other electrical equipment
on the same circuit, such as computers. If this happens, use a wall outlet on a different circuit.
Note:
Any components connected via
will also be turned
on when the remote controller’s [On] button is pressed.
Phones
Listening
Mode
Audio
Selector
Tone
Zone 2
Select/ Preset
Push To Enter
Setup
Control / Tuning
Push To Enter
Rec/ Zone 3
Digital
S Video
Video
Audio
L
R
Video 7 Input
Level
Exit
Level
Dimmer
Memory
Tuning
Mode
Clear
Pure Audio
Open
DVD
Display Tape
1
Tape
2
Tuner
Phono
C D
Net Audio
Video 1
Video 2
Video 3
Video 4
Video 5
Video 6
Video 7
Standby
Master Volume
Rec/ Zone 3 Red )
(
Main Blue
(
)
Zone 2 Green
(
)
Standby/On
Standby/On
Master Volume
Standby indicator
Input source buttons
To wall outlet
Turning on the Power
1
Plug the power cord into an AC
wall outlet.
The [Standby] indicator will light up.
2
Press the [Standby/On] button to
turn on the DTR-10.5.
The display will light up and the
[Standby] indicator will turn off.
If you press the [Standby/On] button
again, the DTR-10.5 returns to the
standby state.
Standby
Standby
Standby/On
Turn off
Operating on the DTR-10.5
1
Select an input source.
Press the input source button.
*You cannot listen to a source in main
room A, and to another source in main
room B.
2
Start playing the device selected.
When playing a picture device such as a
DVD player, you need to switch input to
a monitor such as a TV set.
Some picture-playing devices such as a
DVD-type game machine may also
require setting of sound output. Refer to
the manual of the device connected.
3
Adjust the volume level with the
[Master Volume] dial.
You can adjust the volume level in the
range from –
∞
, –81.5 dB to 18.0 dB
(Max) (when Relative is selected in the
Volume Setup sub-menu).
Hint:
The DTR-10.5 is a product for users to
enjoy home theater, so it is equipped
with a wide range of volume levels.
Please fine tune the volume level
according to your preferences.
Display
Tape 1
Tape 2
Video 4
Video 5
Video 6
Video 7
DVD
Video 3
Video 2
Video 1
C D
Net Audio
Phono
Tuner
Master Volume