IBM Enterprise Server H80 Series - Manual (Page 61)

Read Progress Indicators from Last System Boot
Displays a number of the boot progress indicators, which may include Service
Processor checkpoints, IPLROS checkpoints, and/or AIX configuration codes,
from the previous system boot. This information can be useful in diagnosing
system faults.
The progress indicator codes are listed from top (latest) to bottom (oldest).
This information is not stored in nonvolatile storage. If the system is powered
down using the power-on button on the operator panel, this information is
retained. If the ac power is disconnected from the system, this information will be
lost. For an example, refer to “LCD Progress Indicator Log” on page 77.
Read Service Processor Error Logs
Displays error conditions detected by the service processor. Refer to “Service
Processor Error Logs” on page 75 for an example of this error log.
Read System POST Errors
Select this item to review the results of the POST (Power-On Self Test). Your
server may be able to start in the presence of POST errors if there are sufficient
working system resources. If POST errors occur during startup, this error log,
when used with the diagnostics, helps to isolate faults. Refer to “System POST
Errors” on page 76 for an example of this error log.
Read NVRAM
Displays Non Volatile Random Access Memory (NVRAM) content.
Read Service Processor Configuration
Displays current service processor configuration.
Chapter 3. Using the Service Processor 45