IBM Enterprise Server H80 Series - Manual (Page 102)

IP Parameters: Select the IP Parameters option from the Network Parameters
menu to display a screen similar to the following:
IP Parameters
1. Client IP Address [9.3.146.162]
2. Server IP Address [9.3.146.171]
3. Gateway IP Address [ . . . ]
4. Subnet Mask [255.255.255. ]
.------.
|X=Exit|
------'
===>
To set an address using this menu, do the following:
1. Type the number of the selection (1, 2, 3, or 4).
2. Enter the address on the next screen.
Attention: If the client system and the server are on the same subnet, set the
gateway IP address to [0.0.0.0].
Adapter Parameters: Select the Adapter Parameters option from the Network
Parameters menu to view an adapter's hardware address, as well as configure
network adapters that require setup. A screen similar to the following displays when
you make this selection:
86 RS/6000 Enterprise Server Model H80 Series User's Guide