IBM Enterprise Server H80 Series - Manual (Page 55)

System Power Control Menu
This menu is used to set power control options. Other menus that control boot
options are available here:
SYSTEM POWER CONTROL MENU
1. Enable/Disable Unattended Start Mode:
Currently Enabled
2. Ring Indicate Power-On Menu
3. Reboot/Restart Policy Setup Menu
4. Power-On System
5. Power-Off System
6. Enable/Disable Fast System Boot
Currently Enabled
7. Boot Mode Menu
98. Return to Previous Menu
99. Exit from Menus
1>
Enable/Disable Unattended Start Mode
Use this option to instruct the service processor to restore the power-state of the
server after a temporary power failure. Unattended Start Mode can also be set
through the System Management Services (SMS) Menus. It is intended to be
used on servers that require automatic power-on after a power failure. For more
information, see “System Power-On Methods” on page 62.
Chapter 3. Using the Service Processor 39