IBM Enterprise Server H80 Series - Manual (Page 56)

Ring Indicate Power-On Menu
RING INDICATE POWER-ON MENU
1. Ring indicate power-on :
Currently Enabled
2. Number of rings:
Currently 3
3 . Refresh Modem Settings
98. Return to Previous Menu
Ring indicate is enabled by default on both serial port 1 (S1) and serial port 2
(S2). When ring indicate power on is enabled, call-in is disabled.
If ring indicate power-on is enabled and call-in is already enabled, you will be
asked to confirm your choice. Refer to the message displayed on your screen.
If the ring indicate power-on setting is changed, you must select option 30,
Refresh Modem Settings to update the modem settings. If option 30, Refresh
Modem Setting is selected, and the modem(s) have not been configured, you will
be asked to configure the modems first. See “Call-In/Call-Out Setup Menu” on
page 53 for information on configuring modems.
Option 2 is used to set the number of rings.
40 RS/6000 Enterprise Server Model H80 Series User's Guide