IBM Enterprise Server H80 Series - Manual (Page 101)

Remote Initial Program Load Setup
This option allows you to enable and set up the remote startup capability of your
system. You must first specify the network parameters as shown in the following
screen:
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
.------.
|X=Exit|
------'
===>
Note: Some applications may require that IP addresses contain leading zeroes for
numbers less than 100. For example, 129.132.4.20 may need to be entered as
129.132.004.020.
Chapter 4. Using System Management Services 85