IBM Enterprise Server H80 Series - Manual (Page 161)

Where x is a sequential diskette number). The complete trace table consists of
the sequential concatenation of all the diskette data files.
When the trace table is written to a disk file, the service aid prompts for a file
name. The default name is: /tmp/TRACE.
x, where x is the AIX name of the
SCSD tape drive being tested.
Display or copy a tape drive's log sense information.
The service aid provides options to display the log sense information to the
screen, to copy it to a DOS formatted diskette, or to copy it to a file. The file
name LOGSENSE.DAT is used when the log sense data is written to the
diskette. The service aid prompts for a file name when you have selected that
the log sense data is to be copied to a file.
This service aid can be run directly from the AIX command line. See the following
usage command syntax (path is /usr/lpp/diagnostics/bin/utape):
utape [-h | -?] [-d device ][-n | -l | -t]
OR
utape -c -d device [-v] {-n | {-l | -t} { -D | -f [ filename ]}}
Flag Description
-c Run the service aid without displaying menus. The return code indicates
success or failure. The output is suppressed except for the usage
statement and the numeric value for hours since cleaning (if -n and -D
flags are used).
-D Copy data to diskette.
-f Copy data to the file name given after this flag or to a default file name if
no name is specified.
-h, -? Display a usage statement and/or return code. If the -c flag is present,
only the return code displays to indicate the service aid did not run. If the
-c is not used, a usage statement displays and the service aid exits.
-l Display or copy log sense information.
-n Display time since drive was last cleaned.
-t Copy trace table.
-v Verbose mode. If the -c flag is present, the information displays on the
screen. If the -n flag is present, the information about tape-head cleaning
is printed.
Chapter 6. Introducing Tasks and Service Aids 145