Intel SR1450 - Manual (Page 63)

Hardware Installations and Upgrades
Intel ® Server Chassis SR1450 User Guide 63
Removing and Installing the SATA or SCSI Backplane
Your server chassis must be configured with one of the following drive installation options:
ƒ
A hot-swap SCSI option that came with a SCSI backplane board.
ƒ A hot-swap SATA option that came with a SATA backplane board.
CAUTION
The backplane is tool-less, but NOT hot swappable. Before removing or
replacing the backplane, you must first take the server out of service, turn off
all peripheral devices connected to the system, turn off the system by
pressing the power button, and unplug the AC power cord from the
system or wall outlet.
The backplane board and the hardware that came with the backplane can be replaced if your
backplane fails or if a different option is required. To replace the backplane, use the following
instructions to remove and then to install a backplane.