Installing and removing a pci add-in card, Installing a pci add-in card – Intel SR1450 User Manual
Page 47
Hardware Installations and Upgrades
Intel
®
Server Chassis SR1450 User Guide
47
Installing and Removing a PCI Add-in Card
Installing a PCI Add-in Card
In the slot provided by the PCI riser card, you can install one add-in card. Use the following
instructions to install an add-in card.
1. Observe the safety and ESD precautions at the beginning of this book. See
“Safety
Information.”
2. Power down the server and unplug all peripheral devices and the AC power cable(s).
3. Remove the chassis cover. For instructions, see “
Removing the Chassis Cover
.”
4. Pull up on the two latches on the assembly.
5. Lift the PCI riser assembly from the chassis.
TP01615
Figure 34. Removing the PCI Riser Assembly from the Chassis