Intel GA-G1975X - Manual (Page 43)

BIOS Setup - 43 -
English
Limit CPUID Max. to 3
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disables CPUID Limit for windows XP.(Default value)
No-Execute Memory Protect (Note)
Enabled Enable No-Execute Memory Protect function.(Default value)
Disabled Disable No-Execute Memory Protect function.
CPU Enhanced Halt (C1E) (Note)
Enabled Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled Disable CPU Enhanced Halt (C1E) function.
CPU Thermal Monitor 2 (TM2) (Note)
Enabled Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled Disable CPU Thermal Monitor 2 (TM2) function.
CPU EIST Function (Note)
Enabled Enable CPU EIST function.(Default value)
Disabled Disable CPU EIST function.
Virtualization Technology
Enabled A VMM can utilize the additional hardware capabilities provided by
Virtualization Technology. (Default value)
Disabled Disabled this function.
Delay For HDD (Secs)
Set delay HDD time from 0~15(secs).
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI Set Init Display First to PCI VGA card.
PEG Set Init Display First to PCI Express VGA card (PCIE_16_1 slot). (Default value)
PEG2 Set Init Display First to PCI Express VGA card (PCIE_16_2 slot).
DRAM Data Integrity Mode
ECC Enable Memory Error Checking and Correction feature when all installed DIMMs
are 72bits width.
Non-ECC Set DRAM Data Integrity Mode to Non-ECC. (Default value)