English, 2 advanced bios features, Hard disk boot priority – Intel GA-G1975X User Manual

Page 41: Bios flash protection, First / second / third boot device

BIOS Setup

- 41 -

English

2-2

Advanced BIOS Features

Hard Disk Boot Priority

Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.

Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press to exit this menu.

BIOS Flash Protection

This feature allows you determine the states that flash BIOS.

Auto

BIOS enables flash write access automatically when updating BIOS
data/DMI/ESCD. (Default Value)

Enabled

During POST, DMI/ESCD would not be updated. But flash tools can
update BIOS always.

First / Second / Third Boot Device

Floppy

Select your boot device priority by Floppy.

LS120

Select your boot device priority by LS120.

Hard Disk

Select your boot device priority by Hard Disk.

CDROM

Select your boot device priority by CDROM.

ZIP

Select your boot device priority by ZIP.

USB-FDD

Select your boot device priority by USB-FDD.

USB-ZIP

Select your boot device priority by USB-ZIP.

USB-CDROM

Select your boot device priority by USB-CDROM.

USB-HDD

Select your boot device priority by USB-HDD.

LAN

Select your boot device priority by LAN.

Disabled

Disable this function.

" # " System will detect automatically and show up when you install the Intel

Pentium

processor with HT Technology.

(Note) This item will show up when you install a processor that supports this function.

Advanced BIOS Features

` Hard Disk Boot Priority

[Press Enter]

BIOS Flash Protection

[Auto]

First Boot Device

[Floppy]

Second Boot Device

[Hard Disk]

Third Boot Device

[CDROM]

Boot Up Floppy Seek

[Disabled]

Boot Up Num-Lock

[On]

Password Check

[Setup]

Interrupt Mode

[APIC]

HDD S.M.A.R.T. Capability

[Disabled]

CPU Hyper-Threading #

[Enabled]

Limit CPUID Max. to 3

[Disabled]

No-Execute Memory Protect

(Note)

[Enabled]

CPU Enhanced Halt (C1E)

(Note)

[Enabled]

CPU Thermal Monitor 2(TM2)

(Note)

[Enabled]

CPU EIST Function

(Note)

[Enabled]

Virtualization Technology

[Enabled]

Delay For HDD (Secs)

[0]

Init Display First

[PEG]

DRAM Data Integrity Mode

Non-ECC

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F3: Language F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Item Help
Menu Level`

Select Hard Disk Boot
Device Priority