Midland Radio SYN-TECH III P25 - Manual (Page 61)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
53
4.2.11 Adding and Deleting from Command Zone
Press the Add/Delete from
Command Zone key (default:
star key) until “Add to
Command Zone?” is displayed.
Then press the left soft key (OK)
to add the displayed channel to
the command zone. Once the
command zone contains
channels, it will be displayed on
the zone selection list.
Channels may be removed from
the command zone by selecting
the desired channel in the
command zone. Then press the
Add/Delete from Command Zone
key until “Delete from Command
Zone” is displayed. Then press
the left soft key (OK) to remove
the channel from the command
zone.
Figure 4.54 – Adding to Command Zone
Press
Command
Zone key until
“Add To
Command
Zone?” Then
press YES
Use Zone
Entry to
switch to the
Command
Zone
Figure 4.55 – Switching to Command Zone
Figure 4.56 – Deleting from Command Zone
Press
Command
Zone key until
“Delete from
Command
Zone?” Then
press YES