Midland Radio SYN-TECH III P25 - Manual (Page 48)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
40
4.2.4 Transmitting Digital Individual Calls
A digital individual call is addressed to
a single unit ID rather than a talk
group. To transmit an individual call,
press the Individual Entry key
(default: pound key) until
“INDIVIDUAL:” is displayed. Enter the
unit ID or press the left soft key
(INDEX) to select from the address
book. Press the left soft key (OK) to
enter individual call mode.
Then press PTT to initiate an
individual call to the selected unit ID.
An individual call may also be initiated
directly from the index by selecting
the index entry, then pressing the
(scan key).
If no signal is received and PTT is not pressed for ten seconds,
individual call mode will time out.
Individual call initiation may be disabled in radio programming.
Press # key
until
“Individual:”
is displayed
Enter unit
ID or press
INDEX.
Press OK to
enter
individual
call mode
Figure 4.36 – Entering individual call mode