Midland Radio SYN-TECH III P25 - Manual (Page 60)

Syn-Tech III P25 Portable Radio
OPERATION MANUAL
680-090-2040
Version 6.0
http://www.midlandradio.com
52
4.2.10 Selecting from User Tone List
Press the User Selectable Code
Entry keys (short or long press of
the numeric keypad) to enter a
one or two digit User Tone List
selection. The name associated
with the new tone/NAC selection
will be briefly displayed when it is
selected and when PTT is
pressed. The user selected code
will be utilized for the current
channel until it is changed to
another tone or the radio is
reprogrammed. Selecting Code
“0” will return the radio to the
default tone/NAC selection
originally programmed for the
channel.
The ability to use the User Tone List is set in radio programming on a per
channel basis. Some channels may not have the User Tone List
enabled.
Key in the
User Tone
List number to
use a new
channel
tone/NAC
selection
Figure 4.51 – Selecting new user tone/NAC
User
Selectable
Code Entry of
“0” selects the
default
channel
programming
Figure 4.53 – Selecting default tone/NAC
Figure 4.52 – Current selection displayed w/PTT
Current User
Tone List
selection is
displayed
when PTT is
pressed